Convert Plug In Light To Ceiling Fixture

Mount the light fixture.

Convert plug in light to ceiling fixture. Some two wire extension cords have only a plastic coating and no sheathing. See below how to convert any fixture from a hard wire light into a plug in so you can use it anywhere. Twist and attach light fixture wires to matching extension cord wires on the back side of wall unit and screw on wire nuts.

The wire feeding the actual fixture must not be white and must not be a white that has been re marked as hot. Cut the female plug off of the extension cord then cut about 4 inches of sheathing from the cord with the utility knife. Cut off the outer layer of insulation.

The first way is really simple and doesn t require any electrical knowledge or understanding whatsoever. If you have the need to mount something to the ceiling and need a place to plug it in you can convert a ceiling light fixture into an electrical receptacle. Then add about 6 inches to that length and cut your cord there.

In hallways a fixture should be close to the ceiling and in other rooms your height will depend on whether or not you are working above a table. Basically repeat steps five six from above tutorial. The conversion procedure involves connecting the fixture s wires to a length of lamp cord which is then plugged into a regular wall outlet.

Hold your light fixture up to the ceiling and measure the length of cord you ll need from there. Thread the light fixture wires through the center hole and screw on the mounting nuts to the mounting screws. To do this you simply purchase a screw in adapter that will screw into your light socket like a light bulb but it will have a plug or two on the end of it.

Learn how to convert a switched plug to a new switched ceiling light with our do it yourself articles. Convert that switched plug to a new ceiling light. A white wire may be used to feed the hot connection to the switch but not to.